Select Fill Texas: 30,000 cubic yards of lab-tested select fill available now in Katy, TX. This material comes off a construction project in the Katy area and has tested within a select fill range, with a plasticity index of 16 and a liquid limit of 28, against an 8 to 20 PI and under 40 LL specification. The material is brown sandy lean clay (CL), and Standard Proctor results are on file, including a maximum dry unit weight of 117.4 lbf/ft³ at 11.8% optimum moisture. With documentation in hand and the full volume ready to move, this listing suits contractors and developers who need verified fill for building pads, subgrade, and backfill across the Katy and west Houston corridor. Contact through BorrowPit.com to inquire on pricing and coordinate scheduling.
| Detail | Information |
|---|---|
| Material | Select Fill: Brown Sandy Lean Clay (CL) |
| Lab Report | Yes, test results on file |
| Liquid Limit | 28 |
| Plastic Limit | 12 |
| Plasticity Index | 16 |
| Passing No. 200 Sieve | 90% |
| Max Dry Unit Weight (Std. Proctor) | 117.4 lbf/ft³ |
| Optimum Water Content | 11.8% |
| Specific Gravity | 2.65 (estimated) |
| Location | Katy, TX 77494 |
| Quantity | Approximately 30,000 CY |
| Loading | Free |
| Delivery | Borrow Pit will manage delivery |
| Best For | Building pads, subgrade, backfill, embankment, site grading |
| Price | Inquire for pricing |
| Availability | Available now |
What is Select Fill in Texas?
Select fill Texas is engineered fill defined by laboratory limits rather than appearance, which separates it from common fill. For building pads and structural subgrade, engineers typically cap the liquid limit and hold the plasticity index within a set band, because soils with a lower PI shrink and swell less than the high-plasticity clays common along the Gulf Coast. This Katy material tested at a liquid limit of 28 and a plasticity index of 16, inside an 8 to 20 PI and under 40 LL range, and classifies as a brown sandy lean clay (CL). Standard Proctor testing on the sample gave a maximum dry unit weight of 117.4 lbf/ft³ at 11.8% optimum moisture, the compaction targets a contractor would use to place it in lifts. Earthwork requirements vary by project, so buyers should compare these results with their geotechnical report and with the TxDOT Standard Specifications where those apply. Results reflect the tested sample, and acceptance on any permitted or engineered project rests with the project engineer.
Why This Listing Stands Out
- Lab tested with data on file: liquid limit, plasticity index, gradation, and Standard Proctor results are available, supporting projects that require verified material.
- Tested within a select fill range: a PI of 16 and LL of 28 fall within a common 8 to 20 PI and under 40 LL specification.
- 30,000 CY available now: a large volume ready to move, suited to subdivisions, commercial pads, and multi-phase earthwork.
- Compaction data included: maximum dry density and optimum moisture are known, which helps with planning lift placement and moisture conditioning.
- Katy corridor location: convenient for contractors working across Katy, Cypress, Fulshear, and the west Houston metro.
Best Uses
- Building pad construction
- Foundation and structural subgrade preparation
- Backfill for foundations, retaining walls, and utilities
- Roadway and parking lot subgrade
- Embankment and slope construction
- Raising lot elevation on residential and commercial sites
- Large-scale site grading and earthwork balancing
Service Area
Located in Katy, TX, this select fill Texas listing sits along the west Houston corridor, with access for contractors and project teams across the greater Houston metro, including Cypress, Fulshear, Richmond, and Sugar Land. The material is available now. Contact through BorrowPit.com to inquire on pricing, confirm loading and trucking arrangements, and schedule hauls.
Browse other available materials near Katy, TX on BorrowPit.com.
Frequently Asked Questions
How much does the select fill cost?
Pricing is available upon inquiry. Use the Request Quote button on this listing to contact us through BorrowPit.com.
Is there testing or documentation available?
Yes. Laboratory results are on file, including liquid limit, plastic limit, plasticity index, percent passing the No. 200 sieve, and Standard Proctor density and moisture. Contact us through BorrowPit.com to request the data for your project.
What does a plasticity index of 16 mean?
Plasticity index measures how much a soil’s behavior changes with moisture. A lower PI means less shrink and swell. A PI of 16 sits in the moderate range, which is why it falls inside the 8 to 20 PI band commonly used for select fill under building pads.
What type of soil is this?
Brown sandy lean clay (CL), with about 90% passing the No. 200 sieve.
What is the difference between select fill and common fill?
Select fill is verified by lab testing to meet defined limits, usually liquid limit and plasticity index. Common fill is general excavation material without those requirements. Select fill is typically required under building pads and on engineered or permitted projects.
How much material is available?
Approximately 30,000 cubic yards, available now. Contact us through BorrowPit.com to confirm current volume before scheduling hauls.
Is loading available?
Yes, free loading is available.
Is delivery or trucking available?
Contact us through BorrowPit.com to discuss trucking arrangements for your project.
Will this material meet my project’s specification?
The test results apply to the sampled material. Buyers should compare them against their geotechnical report or project specification and confirm acceptance with their project engineer before use on permitted or load-bearing work.
